Ideal for cross-cutting wood at a specific angle, zeroed at 90 degrees, it allows the wood to be cut at any angle between 0 and 90 degrees(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°)
The Miter Gauge System has a flip-stop system that allows you to easily perform accurate and repeatable cuts.
The slide bar has a locking washer fit into the “T” slot to prevent accidental lifting when feeding your stock through, If your saw does not have a “T” slot, you can remove the locking washer.
Includes : (1) table saw miter gauge, (1) fence, (1) flip stop, (1) handle, (2) spring-loaded ball bearings, and other accessories
This Miter Gauge Fence adopts an ergonomic handle that can provide a stable grip during cutting
2-1/4 Flip stop
The Miter Gauge System has a flip stop system, that can be locked anywhere along its length. This solid brace allows you to easily perform accurate and repeatable cuts
Simple and accurate setup
It allows you to adjust the miter gauge to any angle you need. 13 common angles ranging from 0 to 90 degrees for quick and easy miter angles(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°)
Sprung loaded ball bearings
The steel miter bar is equipped four sprung loaded ball bearings on the side of the bar for a perfect fit, the sprung loaded ball bearings can be adjusted with the provide hex key wrench in or out to keep the bar snug in the track
Metric Scale
Metric Scale Miter Track Tape
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.