O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

Aluminum Router Plate Dimensions is 11-3/4" X 9-1/4" X 3/8" thick, and fillet radius 19.1mm(3/4").

Be suitable for routers with 3-1⁄2-in.-dia of body.

(Please check the size of our Router Lift to make sure if it matches your router motor and router table .)

The function of clamp block is to quickly clamp the router.

The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place.

Cam wheels can be used to adjust the gaps with the router table to prevent the router plate from vibrating.

Leveling screws can be used to adjust the top and bottom flatness of the router plate and router table.

When setting up and adjusting the router, you can make adjustments directly on the table without having to reach under the table, the router lift makes the adjustment quick and easy.

Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriage and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes.

There are precise centerlines on both sides of the router plate that can help you find the center positions of the bit quickly and effectively.